LG T8003TEEL3, Руководство пользователя, Страница: 14 / 40

BEEPER BUTTON
(Only 1 valve)
• Use to select the proper amount of
water in relation to the weight and
type of laundry. Automatically
controlled, but can be selected
manually by pressing the Water Button.
• WATER is automatically selected for
FUZZY Program. The following setting
are indicated as the button is pushed.
WATER
BUTTON
WATER TEMPERATURE
BUTTON (Only 2 valves)
AIR DRY
CHILD LOCK
FUNCTION
WASH, RINSE,
SPIN BUTTON
• Use to select Water
Temperatures. Pressing
the button allows you to
select COLD » WARM
(HOT&COLD) » HOT »
COLD respectively.
Default setting is COLD.
• If you want to use the
washing machine
without arlam signal
sounds, press BEEPER
button allow you to
select: HIGH » OFF
» LOW » HIGH
respectively.
Default setting is HIGH.
• This button is used for
air-drying of your laundry
• Air dry selection light up in
sequence as follow
TUB DRY » 60 » 90»120 »
TUB DRY as the button is
pushed. • Use to lock or unlock the
control button to prevent
setting from being changed
by a child.
To lock, push the RINSE and
SPIN buttons simultaneously
and to unlock push them one
more time during washing
process. • Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed.
• If adjustments are needed
during the wash, press the
[START/PAUSE] button before
making any changes.
• When the button is pressed
during washing, the remaining
time is displayed.
7 » 8 » 9 »10 » 1 » 2 » 3 » 4 » 5 » 6 » 7
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Time left : During operation, the
remaining time is indicated.
• DELAY START INDICATION
When DELAY START (RESERVATION)
program is selected, it indicates the
finishing time. (RES.=DELAY)
•
Alarm indication - When an error occurs,
an error message appears to indicate the
abnormality. For example, indicates
that the lid is opened.
14