LG T2525NTWV, Руководство пользователя

Страница: 14 / 41

13
INSTALLATION
ENGLISH
Then tighten the four lock nuts. All lock nuts
must be tightened.
NOTE
• The Mini Washer will not work as a standalone
unit.
Connecting the Water
Supply Hose
Needed Accessories
a Water Supply Hose(for cold water)
b Connecting Supply Hose
c Water Supply Hose Connector
Note for Connection
• Water pressure must be between 10 0 kPa and
800 kPa ( 1 . 0 – 8.0 kgf/cm²). If the water
pressure is more than 800 kPa , a
decompression device should be installed.
• Periodically check the condition of the water
supply hose and replace the water supply hose
if necessary.
NOTE
• If the water pressure is near or over 800 kPa, a
water pressure reduction device should be
installed to both taps.
• Exceeding 65 °C can damage some clothes.
• Temperatures below 4 °C can cause hoses to
freeze and burst and unfavourable wash results
due to undissolved detergent.
• Cold inlet Water Temperatures over 25 °C can
cause damage to clothes such as delicate
Woollens
• Do not overtighten the water supply hose or use
mechanical devices to tighten onto the inlet
valves.
• No further backflow protection required for
connection to the water inlet.
Checking the Rubber Seal
Two rubber seals
a
are supplied with the water
supply hose. They are used to prevent water leaks.
Connection to taps is sufficiently tight.
• Do not use mechanical devices such as multi
grips to tighten the water supply hose. Ensure
that the curved end of the water supply hose is
connected to the appliance.