background image

40

EN

Error Messages

Symptoms

Reason

Solution

The door is not closed properly.

 

Close the door completely. If the 

error code is not released, call for 

service.

Door lock switch error.

 

Check nothing is caught under the 

door, including shipping materials or  

lothing.

 

Close the door completely. If the 

error code is not released, call for 

service.

Special Drain Feature.

 

If the washing machine is paused 

during a cycle for a few minutes, the 

cycle will be cancelled and any water 

remaining in the drum will be 

drained.

Water supply taps are not fully 

open.

 

Fully open tap.

Water line hoses are kinked, 

pinched, or crushed.

 

Straighten the hose(s).

Water inlet filters are clogged.

 

Clean the inlet filters.

Water supply pressure to tap or 

house is too low.

 

Contact a plumber to have the water 

lines repaired.

Water supply connected with 

leaklimiting hoses.

 

Do not use leak limiting hoses.

Foreign objects, such as coins, 

pins, clips, etc., caught between the 

wash plate and the inner basket.

 

Turn off the washing machine and 

then press the 

POWER

 button. 

Press the 

Spin

 button without 

selecting a cycle to drain and spin 

the load. When the spin is complete, 

remove the clothes and then find 

and remove any objects caught in 

the wash plate.

Drain hose is kinked, pinched, or 

clogged.

 

Straighten the hose(s).

Drain discharge is more than 1.2 m 

above bottom of washing machine.

 

Adjust or repair drain. Maximum 

drain height is 1.2 m.

Содержание T2516DSAV


















































Отзывы: