8
EN
•
This appliance must be properly grounded to minimize risk of
electric shock.
•
Do not cut or remove the grounding prong from the power plug.
•
Attaching the adapter ground terminal to the wall receptacle cover
screw does not ground the appliance unless the cover screw is
metal, uninsulated, and the wall receptacle is grounded through
house wiring.
•
If you have any doubt whether the air conditioner is properly
grounded, have the wall receptacle and circuit checked by a
qualified electrician.
•
The refrigerant and insulation blowing gas used in the appliance
require special disposal procedures. Consult a service agent or a
similarly qualified person before disposing of them.
•
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agents or similarly qualified person in
order to avoid a hazard.
•
The appliance shall be stored in a well-ventilated area where the
room size corresponds to the room area as specified for
operation.
•
The appliance shall be stored in a room without continuously
operating open flames (for example an operating gas appliance)
and ignition sources (for example an operating electric heater).
•
The appliance shall be stored so as to prevent mechanical
damage from occurring.
