21
OPERATION
EN
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
• The extra options and functions can be changed
when the
START/PAUSE
button is pressed
during operation depending on the selected
programmes, options and functions.
Customising a Washing
Programme
Each programme has default settings that are
selected automatically. You may also customise
these settings using these buttons.
Air Dry
When you select
Air Dry
, you can reduce the drying
time by minimizing the moisture that remains
within the clothes.
• Press the
Air Dry
button to select and press the
POWER
button to deselect.
NOTE
• Always keep the clothes amount to
2 kg
or less
and make sure to redistribute the clothes evenly.
• Select
60 minutes
for cotton clothes and
120
minutes
for synthetic fibre clothes for effective
moisture reduction.
Tub Dry
Use this option when you want to dry the empty
tub after a wash.
1
Remove your clothes after a wash.
2
Press the
POWER
button.
3
Press the
Air Dry
button to select the
Tub Dry
.
4
Press the
START/PAUSE
button.
Temp.
Use this option to change water temperature.
• 3 levels are selected for
Warm
,
Hot
and
Cold
.
Water
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press
Water
option to adjust water level.
Quick Wash
Description
Use this programme to wash lightly soiled clothes for a short time.
• This programme's recommended laundry amount is under
2 kg
.
Extra Clean
Description
Use this programme to increase rinsing performance.
• This programme is recommended for underwear and baby clothes.
• If someone has sensitive skin or skin trouble, use this programme.
Tub Clean
Description
This is a special function to clean inside the drum of your appliance.
• To use this function, refer to the
MAINTENANCE
for details.
global_main.book.book Page 21 Tuesday, August 18, 2020 1:40 PM