background image

14

Bef

or

e Star

ting t

o

 W

ash

F

unction of each Button 

NOTE

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by

8minutes at maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically

adds rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to

the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a

liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

* Bec

TU

* Eve

the 

* The

DELAY

• Use
• The

is pu

• The

as th
... 1

3

• To c

swit

(refer

• It
• D

an
fo

CHILD LOCK FUNCTION

• Use to lock or unlock the

control buttons to prevent
settings from being
changed by a child.
To lock,push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process.
(refer to page 25)

WASH. RINSE. SPIN BUTTON

• Use when wash, rinse, spin

time need to be adjusted.

• The time increases when the

button is pressed .

• If adjustments are needed

during the wash,press the
[start/pause ] button before
making any changes.

• When the button is pressed

during washing,the
remaining time is displayed.

TIME LEFT, DELAY START

(RESERVATION), ALARM INDICATION

• Time left - During operation, the remaining time

is indicated.

• DELAY START INDICATION

(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication - When an error occurs, an error

message appears to indicate the abnormality. 
For example,           indicates that the lid is open.

WATER LEVEL BUTTON

• Use to select the proper amount of water in relation

to the weight and type of laundry.

• Automatically controlled,but can be selected

manually by pressing the WATER LEVEL Botton.

• WATER LEVEL is automatically selected for

FUZZY(normal) program.
The following settings are indicated as the button is
pushed

10 

2  3 

5  6 

7

SOIL LEVEL BUTTON

• This button allows you to

select the strength of the
wash action.

• Power option selections

light up in sequence as
follows Normal 

Heavy

Light 

Normal as the

button is pushed.
This can be selected for any
program.

• Adjustment can be made

while washing.

WATER TEMPERATURE  

BUTTON

• Use to select Water

Temperature. 
Pressing the button allows
you to select  COLD 
WARM (HOT&COLD) 
HOT 

COLD

respectively.  

TUB DRY

• Use this when you

want to dry the
empty tub after a
wash.

• This can be

set/canceled by
pressing the Wash
button and Rinse
button
simultaneously.
(refer to page 22)

AIR DRY

• This function is used to reduce the drying time

of the laundry by allowing air to circulate
within the bowl in order to reduce moisture
levels.It does not dry the clothes completely.

• Air dry selections light up in sequence as

follows.
60 

90 

120 

60 as the button is pushed.

• Press the button for 3 seconds to select and

press the Power botton to cancel the operation.
(refer to page 22)

Содержание T1003ADP4








































Отзывы: