background image

Owner's Manual 

7

Here is a brief introduction of the indoor and outdoor units. Please see the information specific to your
indoor unit type. 

Product Introduction

Product Introduction

Air Inlet

Front Panel

Air Filter

On/Off button

Signal Receptor

Plasma filter

Deodorizer
filter

Indoor Units

ENGLISH

Air intake vents

Air outlet vents

Connecting
wires

Refrigerant pipes

Drain hose

Base plate

On/Off

: Lights up during the system operation, error code and auto restart setting. 

Sleep mode

Energy-Saving
Cooling Mode

: Lights up during sleep mode auto operation.(non-Inverter Model)

: Lights up during Energy-Saving Cooling Mode Operation(Inverter Model only)

Plasma

: The function illustrates its dynamic mode by using a multiple lighting system.

Timer

: Lights up during timer operation.(non-Inverter Model)
  Lights up during timer operation or  sleep mode auto operation (Inverter Model only)

Defrost mode

Power Display : Indicates the setting temperature and operation mode.

: Lights up during defrost mode or 

*hot start operation 

(Heat pump model only)

: Lights up during outdoor unit operation. (Cooling model only)

Outdoor unit
operation

OUT

DOOR

Hot start operation

: Stops the indoor fan in heating operation for minutes to prevent cold air from blowing out from unit. 

* In defrost mode unit stops heating operation for few minutes to remove formation of ice on the heat exchanger coils to 

maintain the efficiency.

Operation

mode

Shape of

display

Setting

temperature

Standard

Too hot

Hot

Cold

Too cold

Jet

Cool/Heat

Test 

operation

Auto

clean

Comfortable

Auto operation mode

Cooling, heating,
Dehumidification 

Mode

Energy-saving 

cooling mode

Outdoor Unit

Operation Indication Lamps

Deodorizer filter function

The Deodorizer filters consist of a various organic-compound filter to eliminate displeasure and pain in the eyes
and necks with various organic compounds. It also has a formaldehyde filter to cut off formaldehyde, a prime
cause of new-house syndromes, and prevents symptoms such as dermatitis, vomiting and pneumonia. And lastly,
it has a filter to remove ordinary odors that are causes of migraine and chronic Fatigues.

Содержание SW342HP




















Отзывы: