background image

5

IMPORTANT SAFETY INSTRUCTIONS 

 

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire, 

explosion, or electric shock, or to prevent property damage, injury to persons, or death.

SAFETY INSTRUCTIONS FOR INSTALLATION

SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY

•  Do not, under any circumstances, cut or 

remove the ground prong from the power 

cord. 

To prevent personal injury or damage to 

the appliance, the electrical power cord must 

be plugged into a properly grounded outlet.

•  This appliance must be plugged into a 230-

VAC, 50-Hz grounced outlet protected by 

a 8-ampere fuse or circuit breaker. 

Failure 

to follow these instructions can result in fire, 

explosion, or death.

•  This appliance must be plugged into a 

properly grounded outlet. Electrical shock 

can result if the appliance is not properly 

grounded. Have the wall outlet and circuit 

checked by a qualified electrician to make 

sure the outlet is properly grounded. 

Failure 

to follow these instructions can create an 

electric shock hazard and/or a fire hazard.

•  Install the appliance where the plug is 

easily accessible. Unplug the appliance 

when not in use 

to avoid risk of fire or 

electric shock.

•  Unplug the appliance before disassembly 

or repair

 to avoid risk of electric shock.

•  The appliance should always be plugged 

into its own individual electrical outlet 

which has a voltage rating that matches 

the rating plate. 

This provides the best 

performance and also prevents overloading 

house wiring circuits which could cause a fire 

hazard from overheated wires.

•  Do not use an extension cord to connect 

to an outlet. 

Doing so could result in a fire or 

electric shock.

•  Never unplug your appliance by pulling on 

the power cord. Always grip the plug firmly 

and pull straight out from the outlet. 

The 

power cord can be damaged, resulting in a 

risk of fire and electric shock.

•  Contact LG or a qualified repair person 

immediately to repair or replace all 

power cords that have become frayed or 

otherwise damaged. Do not use a cord that 

shows cracks or abrasion damage along 

its length or at either end. 

The power cord 

can melt, creating electric shock and/or fire 

hazard.

•  When installing or moving the appliance, 

be careful not to pinch, crush, or damage 

the power cord. 

This will prevent injury and  

damage to the appliance from fire and electric 

shock.

•  Install and store the appliance where it 

will not be exposed to temperatures below 

freezing or exposed to the weather. 

Allow the 

product to warm to room temperature before 

use if it was delivered in winter or at sub-sero 

temperature.

•  Do not repair or replace any part of the 

appliance or attempt any servicing unless 

specifically recommended in the user-

maintenance instructions or in published user-

repair instructions that you understand and 

have the skills to carry out. 

Failure to follow this 

warning can cause serious injury, fire, electric 

shock, or death.

•  To reduce the risk of electric shock, do not 

install the appliance in humid spaces such as 

a bathroom. 

Failure to follow this warning can 

cause death, serious injury, fire, electric shock, 

or product deformation or malfunction. 

•  Remove all packing items and dispose of all 

shipping materials properly. 

Failure to do so can 

result in burns, fire, explosion, or death.

•  Connect to a properly rated, protected, 

and sized power circuit to avoid electrical 

overload. 

Improper power circuits can melt, 

creating electric shock and/or fire hazard.

•  If the supply cord is damaged, 

it must be replaced by the 

manufacturer or its service agents 

or similarly qualified person in 

order to avoid a hazard.

•  Keep all packaging from children. 

Packaging 

material can be dangerous for children. There is 

a risk of suffocation.

•  Do not install near another heat source such 

as a stove, oven or heater. 

Failure to follow this 

warning can cause product deformation, smoke, 

or fire.

•  Do not place candles, smoking materials, 

or other flammables on top of the product. 

Dripping wax, smoke, or fire can result.

•  Remove all protective vinyl film from the 

product. 

Failure to do so can cause product 

damage, smoke, or fire.

•  The appliance shall be installed in 

accordance with national wiring 

regulations

MFL66101244_Singapore.indd   5

2017. 7. 4.   오후 5:00

Содержание STYLER S3*F Series

















































Отзывы: