background image

- 6 -

On-Screen-Display (OSD) Control 

Making adjustments to the image size, position and operating
parameters of the monitor are quick and easy with the On
Screen Display Control system. A quick example is given below
to familiarize you with the use of the controls. Following section
is an outline of the available adjustments and selections you can
make using the OSD.

To make adjustments in the On Screen Display, follow these
steps:

NOTE

Allow the monitor to stabilize for at least 30 minutes before
making image adjustment.

/

AUTO

AUTO

1. Press the           Button, then the main menu of the

OSD appears.

2. To acces a control, use the                      Buttons.

When the icon you want becomes highlighted, press
the AUTO Button.

3. Use the                                            Buttons to adjust

the item to the desired level.

4. Accept the changes by pressing the AUTO Button.

5. Exit the OSD by Pressing the           Button.

Listed below are the icons, icon names, and icon
descriptions of the items that are shown on the Menu.

88

100

BRIGHTNESS CONTRAST

9300K                6500K

COLOR

PRESET    

RED

GREEN

BLUE

61

39

POSITION

Brightness

Used to adjust the brightness of the
screen. 

Contrast 

Adjust the display to the contrast
desired. 

PRESET

RED

GREEN

BLUE

9300K/ 6500K

To appear the displays color temperature.

• 

9300K:Slightly bluish white.

• 

6500K:Slightly reddish white.

To set your own color levels.

To set your own color levels.

To set your own color levels.

Vertical Position

To move image up and down.

Horizontal Position

To move picture image left and right.

TRACKING

CLOCK

PHASE

LANGUAGE

ENGLISH

OSD POSITION

4 8 . 3 k H z   /   6 0 . 0 H z

P R E S E T   M O D E

SETUP

To minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.

To adjust the focus of the display. This item
allows you to remove any horizontal noise and
clear or sharpen the image of characters.

To choose the language in which the
control names are displayed.

To adjust position of the OSD window
on the screen.

LANGUAGE

OSD POSITION

CLOCK

PHASE

Содержание StudioWorks 560LS



































Отзывы: