8
Multi Air Conditioner
Operating Instructions
Wireless Remote Controller Maintenance
1. Remove the battery cover by pulling it according to the arrow
direction.
2. Insert new batteries making sure that the (+) and (-) of battery are
installed correctly.(Battery Size = AAA (1.5 volt))
3. Reattach the cover by sliding it back into position.
1. Always use/replace both batteries of same type.
2. If the system is not to be used for a long time, remove the
batteries to save their working life.
3. If the display screen of remote controller starts, fading replace
both of the batteries.
NOTE
1. Choose a suitable place where its safe & easy to reach.
2. Fix the holder to wall etc with the supplied screws firmly.
3. Slide the remote controller inside the holder.
1. Remote controller should never be exposed to direct sunlight.
2. Signal transmitter & receiver should always be clean for proper
communication. Use a soft cloth to clean them.
3. In case some other appliances also get operated with remote control,
change their position or consult your serviceman.
NOTE
1. The signal receiver is inside the unit.
2. Aim the remote controller towards the unit to operate it.
There should not be any blockage in between.
[Ceiling CassetteType]
[Ceiling Concealed Duct]
[Standard Libero/Artcool Libero Type]
PQRCUCA0
FAN
SPEED
MODE
Cooling Heating Auto Dry Fan
Defrost
Preheat
Out door
Slo
Lo
Med
Hi
Po
Room Temp
Total on
Central Run
Operating Method
How to insert the Batteries
Operating Instructions
