ENGLISH
Mounting on a Table
Lift and tilt the monitor into its upright position on a
table.
-
Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
▪
Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
▪
If you install the monitor on a stand,
you need to take actions to prevent the
product from overturning. Otherwise, the
product may fall over, which may cause
injury.
▪
Do not use any unapproved items to
ensure the safety and product life span.
▪
Any damage or injuries caused by using
unapproved items are not covered by the
warranty.
▪
Make sure that the screws are fastened
tightly. (If they are not fastened securely
enough, the monitor may tilt forward after
being installed.)
▪
Do not fasten the screws with excessive
force otherwise they may be worn out and
become loose.
▪
Only use the authorized stand and wall
mounting bracket made specifically for LG
products.
-
Pursuant to Consumer Protection Law, LG
Electronics will not be held responsible for
any product malfunction, material damage
or injury caused by using products not
authorized by LG Electronics.
Securing the product to a
wall (optional)
1
Insert and tighten the eye-bolts, or product brackets
and bolts on the back of the product.
-If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the product.
3
Connect the eye-bolts and wall brackets tightly with
a sturdy rope. Make sure to keep the rope horizontal
with the flat surface.
•
Use a platform or cabinet that is strong and large
enough to support the product securely.
•
Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local dealer.
