Operating
18
Oper
ating
3
y
When using
Bluetooth
technology, you have
to make a connection between the unit and
the
Bluetooth
device as close as possible and
keep the distance.
However it may not work well in the case
below :
-
There is a obstacle between the unit and
the bluetooth device.
-
There is a device using same frequency
with
Bluetooth
technology such as a
medical equipment, a microwave or a
wireless LAN device.
y
You should connect your
Bluetooth
device to
this unit again when you restart it.
y
The sound may be interrupted when the
connection has interference from other
electronic waves.
y
You may not control the
Bluetooth
device
with this unit.
y
Pairing is limited to one
Bluetooth
device per
unit and multi-pairing is not supported.
y
Depending on the type of the device, you may
not be able to use the
Bluetooth
function.
y
You can enjoy
Bluetooth
function using
Smart phone, MP3 player, Notebook, etc..
y
The more distance between the unit and the
Bluetooth
device, the lower the sound quality
becomes.
y
Bluetooth
connection will be disconnected
when the unit is turned off or the bluetooth
device gets far from the unit.
y
When
Bluetooth
connection is disconnected,
connect the bluetooth device to the unit
again.
y
When this unit is not connected with
Bluetooth
device,
Bluetooth
LED will blink.
y
You can control a
Bluetooth
device using
C/V
(Skip) and
dM
(Play/Pause)
buttons on the remote control.
,
Note
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround sound
fields. You can select a desired sound mode by using
each sound mode button.
Sound effect
Description
ASC
(Adaptive Sound
Control)
Analyzes the property of input
sound and provides the sound
optimized for the content in
real time.
BASS BLAST
Reinforces the bass and
powerful sound.
CINEMA
You can enjoy more immersive
and cinematic surround
sound.
y
In some of the sound effect modes, some
speakers may have no sound or low sound.
It depends on the mode of sound and the
source of the audio, it is not a defect.
y
You may need to reset the sound effect
mode, after switching the input, sometimes
even after the sound file changed.
,
Note
Adjust the woofer level settings
You can adjust the sound level of woofer by pressing
WOOFER LEVEL
o
/
p
button.
When the subwoofer level reaches maximum
or minimum, standby LED (Red) on the main
unit turns on for 2 seconds.
,
Note
