3-2
2. Test & debug flow
Yes
Yes
Yes
Yes
No
Switch on the Power PCBA.
Replace FLASH.
Check the POWER PART.
No
Check the POWER PART.
No
Check the regulators or diode.
No
1. Check 27MHz system clock.
2. Check system reset circuit.
3. Check FLASH R/W enable signal PRD, RWR.
4. Check FLASH Memory related circuit.
Check the
AC voltage
Power PCBA (110V
or 220V).
Update
FLASH
successfully?
Are 3.5V and 5V DC
outputs normal on main
PCBA?
Are the
DC Voltage
outputs OK? (12V, 5.6V,
3.5V, 5V,7V, 34V).
TEST.
A
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only