LG S18TPC, Руководство пользователя

Страница: 12 / 48

12
ENG
ENGLISH
BASIC FUNCTIONS
1. Press and hold it for longer than 3
seconds.
- The AM/pM icon flickers at the bottom of the
display screen.
2. Press or to select the minutes.
3. Press to finish.
1. To adjust the direction of the air flow verti -
cally, press change the air flow direction
automatically.
2. To adjust the direction of the air flow horizon -
tally, press change the air flow direction
automatically.
You can use the timer function to save energy and
to use the air conditioner more efficiently.
ADJUsTING THE AIR FLOW DIRECTION
sETTING THE TIMER
sETTING THE CURRENT TIME
NOTE
• Adjusting the air flow direction horizontally
May not be supported, depending on the model.
• Adjusting the air deflector arbitrarily may cause
product failure.
• If you restart the air conditioner, it starts to
operate with the previously set direction of air
flow, so the air deflector may not match the icon
displayed on the remote control. When this oc-
curs, press or to adjust the direction
of the air flow again.
!
1. Press
- The icon below flickers at the bottom of the
display screen.
1. Press
- The icon below flickers at the bottom of the
display screen.
2. Press or to select the minutes.
3. Press to finish.
4. When setting the timer, current time and ON
icon are displayed on the display screen indicat-
ing that the desired time is set.
2. Press or to select the minutes.
3. Press to finish.
4. When setting the timer, current time and OFF
icon are displayed on the display screen indicat-
ing that the desired time is set.
TURNING ON THE AIR CONDITIONER
AUTOMATICALLY AT A sET TIME
TURNING OFF THE AIR CONDITIONER
AUTOMATICALLY AT A sET TIME
SWING
ON
OFF
SWING
SWING
SWING
TIME [3SEC]
SET
CLEAR
TIME [3SEC]
SET
CLEAR
TIME [3SEC]
SET
CLEAR
TIME [3SEC]
SET
CLEAR
Rev : 01 (04T16)
NOTE
• The air-condition will not operate if curtains,
doors or other objects block the signals from
the remote control to the indoor unit.
• Be careful that liquids do not spill onto the
remote control.
• Do expose the remote control to direct sunlight
or heat. If the infrared signal receiver on the indoor
unit is exposed to direct sunlight, the air-condition
may not function properly. use curtains to prevent
sunlight from receiving the receiver.
• Signals may not be properly received, if the room
using the air-condition has fluorescent lighting
with electronic starters. if you are planning on
using fluorescent lamps, consult with local dealer.
• If other electrical appliance are activated by the
remote control, move this appliance or consult
with local dealer.
!