LG RZ-27LZ55, Руководство по обслуживанию

Страница: 11 / 37

- 11 -
3.4 Video signal Gain/Offset Adjustment
(Auto adjustment)
- Execution of RF no signal during Heat Run over 30min
- Connect to the LCD TV SCART input terminal with Patten
Generator(MSPG-925FS)
- Convert INPUT MODE to S-Video or AV1.
- Connect RS-232C Communication Cable to the Auto
Adjustment Equipment and SET's upgrade Port
3.4.1 Low Gray Adjustment
- Apply Gray-Level(Model : 202 PAL_BDGH, pattern : 59)
signal by using Pattern Generator(MSPG-925FS)
- Check weather color-coordinates 23" & 26" & 32"AUO (x:
0.283, y:0.298, ±0.005), 32" LPL(x:0.280, y:0.290, ±0.005),
32"&27" CMO(x:0.275, y:0.285, ±0.005), 26" AUO
(x:0.280, y: 0.285, ±0.005) is operated by using CA-110
equipment
- If color-coordinates is not in Spec, adjust color-coordinates
23" & 26" & 32"AUO (x: 0.283, y:0.298, ±0.005), 32"LPL
(x:0.280, y:0.290, ±0.005), 32"&27" CMO(x:0.275, y:0.285,
±0.005), 26" AUO (x:0.280, y:0.285, ±0.005) by adjusting
Red Offset, Blue Offset
3.4.2 White Balance Adjustment
- Apply 95% White (Model : 202 PAL_BDGH, pattern : 47,
luminance spec : 250cd/m^2 over) signal by using Patten
Generator(MSPG925FS)
- Check whether color-coordinates(x:0.283, y:0.298, ±0.005)
is operated by using CA-110 equipment
- If color-coordinates is not in Spec, adjust color-
coordinates(x:0.283, y:0.298, ±0.005) by adjusting Red
Gain, Blue Gain
- All adjustment takes color-coordinates with based on G,
changing R and B. If it is not adjusted, adjust with fixed B,
changing G and R.
3.5 Component signal Gain/Offset Adjustment
(Auto adjustment)
- Execution of RF no signal during Heat Run over 30min
- Connect to the LCD TV Component1 terminal with Patten
Generator(MSPG-925FS)
- Convert INPUT MODE to Component1.
- Connect RS-232C Communication Cable to the Auto
Adjustment Equipment and SET's upgrade Port
3.5.1 Low Gray Adjustment
- Apply Gray-Level(Model : 210 576i, pattern : 59) signal by
using Patten Generator(MSPG925FS)
- Check whether color-coordinates 23" & 26" & 32"AUO (x:
0.283, y:0.298, ±0.005), 32"LPL(x:0.280, y:0.290, ±0.005),
32"&27" CMO(x:0.275, y:0.285, ±0.005), 26" AUO
(x:0.280, y:0.285, ±0.005) is operated by using CA-110
equipment
- If color-coordinates is not in Spec, adjust color-coordinates
23" & 26" & 32"AUO (x:0.283, y:0.298, ±0.005), 32"LPL
(x:0.280, y:0.290, ±0.005), 32"&27" CMO(x:0.270, y:0.285,
±0.005) , 26" AUO (x:0.280, y:0.285, ±0.005) by adjusting
Red Offset, Blue Offset
3.5.2 White Balance Adjustment
- Apply 95% White(Model:210 576i, pattern : 47, luminance
spec : 250cd/m^2 over) signal by using Patten Generator
(MSPG925FS)
- Check whether color-coordinates(x:0.283, y:0.298,
±0.005) is operated by using CA-110 equipment
- If color-coordinates is not in Spec, adjust color-
coordinates(x: 0.283, y:0.298, ±0.005) by adjusting Red
Gain, Blue Gain
- All adjustment takes color-coordinates with based on G,
changing R and B. If it is not adjusted, adjust with fixed B,
changing G and R.
4. EDID (The Extended Display
Identification Data) SETTING
- Connect D-Sub to DVI-I Cable to DVI-I Jack.
- Input analog signal and check pc video in the screen.
- After appearing the pc video, write Analog EDID data.
- Connect DVI D Cable to DVI Jack.
- Input digital signal and check pc video in the screen.
- After appearing the pc video, write digital EDID data.
[DDC DATA Analog Set]
[DDC DATA Digital Set]
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 FF FF FF FF FF FF 00 1E 6D 45 75 01 01 01 01
10 0C 0E 01 03 01 40 26 78 08 B1 DA A1 56 48 98 24
20 13 48 4B A1 08 00 31 40 01 01 01 01 45 40 01 01
30 61 40 81 80 01 01 4E 1F 00 90 51 00 1B 30 40 88
40 13 00 A2 0B 32 00 00 18 1B 21 50 A0 51 00 1E 30
50 48 88 35 00 A2 0B 32 00 00 1C 00 00 00 FD 00 3B
60 3D 1F 30 09 00 0A 20 20 20 20 20 20 00 00 00 FC
70 00 52 5A 32 37 4C 5A 35 35 0A 20 20 20 20 00 D7
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 FF FF FF FF FF FF 00 1E 6D 46 75 01 01 01 01
10 00 0E 01 03 81 40 26 78 08 B1 DA A1 56 48 98 24
20 13 48 4B A1 08 00 31 40 01 01 01 01 45 40 01 01
30 61 40 81 80 01 01 4E 1F 00 90 51 00 1B 30 40 88
40 13 00 A2 0B 32 00 00 18 1B 21 50 A0 51 00 1E 30
50 48 88 35 00 A2 0B 32 00 00 1C 00 00 00 FD 00 3B
60 3D 1F 30 09 00 0A 20 20 20 20 20 20 00 00 00 FC
70 00 52 5A 32 37 4C 5A 35 35 0A 20 20 20 20 01 55
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 02 03 0E 00 49 85 04 02 01 03 11 12 13 14 01 1D
10 00 72 51 D0 1E 20 6E 28 55 00 C4 8E 21 00 00 1A
20 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 C4 8E 21 00
30 00 18 01 1D 80 18 71 1C 16 20 58 2C 25 00 C4 8E
40 21 00 00 9E 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 95