LG RT-50PZ60, Руководство по обслуживанию

Страница: 11 / 37

- 11 -
8. Adjustment of Component Off-Set
8-1. Required Test Equipment
: HD-STB(SK-010T) or same product
8-2. Manual Adjustment of Component Off-
Set
(1) Input Video signal and Component 720P,1080i signal of
HD-STB.
(2) Press ADJ key of R/C twice for entering twin picture mode.
(3) Adjust the same color senses between main and sub,
using ; -key of R/C in R, G, B Off-Set menu.
9. DDC Data input
9-1. Required Test Equipment
(1) A jig for adjusting PC, DDC. (PC serial to D-sub
Connection equipment)
(2) S/W for writing DDC(EDID data write & read)
(3) D-Sub 15P cable, D-Sub to DVI Connector (Connect to
DVI Jack)
9-2. Setting of Device
9-3. Preparation for Adjustment
(1) Set devices as above and turn the PC, jig on.
(2) Put S/W for writing DDC (EDID data write & read) into
operation. (operated in DOS mode.)
9-4. Sequence of Adjustment
(1) DDC Data Input for Analog-RGB
¤
Put the set on the table and turn the power on.
¤Ł
Connect PC Serial to D-sub 15P Cable of JIG for DDC
Adjustment to RGB terminal (D-Sub 15Pin).
¤Ø
Operate S/W for DDC record and select DDC Data for
Analog RGB in Model Menu.
¤Œ
Operate EDID Write command.
¤º
Operate EDID Read command and check whether
Check Sum is OK.
¤
If Check Sum is NG, repeat
¤Ø
~
¤Œ
.
¤
If Check Sum is OK, DDC Data for Analog-RGB input is
completed.
(2) DDC Data input for Digital-RGB
¤
Connect PC Serial to DVI Cable of JIG for DDC
Adjustment to RGB2 terminal (DVI Jack).
¤Ł
Operate S/W for DDC record and select DDC Data for
Digital RGB in Model Menu.
¤Ø
Operate EDID Write command.
¤Œ
Operate EDID Read command and check whether
Check Sum is OK.
¤º
If Check Sum is NG, repeat
¤Ø
~
¤Œ
.
¤
If Check Sum is OK, DDC Data for Digital-RGB input is
completed.
* If you change the Booster 0 to 1 in a fringe area, a
user ca set to Booster “On”.
http://www.wjel.net