LG RC8011A, Руководство пользователя

Страница: 7 / 28

Installation Instructions
7
I
nstallation Instructions
Stacking Kit
In order to stack this dryer an LG stacking kit is
required.
This dryer may only be stacked on top of an LG wash-
er. DO NOT attempt to stack this dryer on any other
washer, as product damage, injury or property
damage could result.
To stack this dryer, the support holder included with
the stacking kit must be used.
Installation Procedure
1. Place the LG dryer on the LG Washing machine.
2. Remove two screws at the bottom of the rear cover
on each side as shown below.
3. Assemble the stacking kit as following.
• Peel the protective film from the double-sided tape on
the bracket for your size washer.
• Attaching the support holder.
• Align the stacking kit holes and the rear cover holes
and then firmly attach the bracket to the side of the
washer in that position.
23.6 inch(600 mm)
21.7 inch(550 mm)
4. Assemble a stacking kit as following.
• Screw 2 screws which were removed earlier to
assemble dryer and stacking kit.
• Use accessory screws [1.2inch (30mm)] to assem-
ble washer rear cover and stacking kit. ,
• The procedure for the opposite side will be the
same.
WARNING
• Incorrect installation can cause serious acci-
dents.
• The weight of the dryer and the height of instal-
lation makes the stacking procedure too risky
for one person. This procedure should be per-
formed by 2 or more experienced service per-
sonnel.
• The dryer is not suitable for a built-in installa-
tion. Please do not install as a built-in.
• Do not operate if the dryer is disassembled.
Shape
21.7 inch
(550mm)
Washer Top plate size
23.6 inch
(600mm)
Support
Holder
550
Dryer
Washer
Support Holder