background image

1

8

MAINTENANCE

ENGLISH

Cleaning the air filter

Clean the air filter once every 2 weeks or
more if necessary.

1

Turn off the power and unplug the power
cord.

2

Open the front cover.

- Lift up both sides of the cover slightly.

* The feature can be changed according a

type of model.

3

Hold the knob of the air filter, lift it up
slightly and remove it from the unit.

* The feature can be changed according a

type of model.

4

Clean the filter with a vacuum cleaner or
with warm water.

- If dirt is difficult to remove, wash the filter

in lukewarm water with detergent.

5

Dry the filter in the shade.

Cleaning the anti-allergy filter
and triple filter

1

Turn off the power and unplug the power
cord.

2

Open the front cover and remove the air
filter (see “Cleaning air filter”).

3

Pull out the anti-allergy filter and the triple
filter.

4

Dry the filter in direct sunlight for 2 hours.

Cleaning the plasma filter

1

Turn off the power and unplug the power
cord.

2

Open the front cover and remove the air
filter (see “Cleaning air filter”).

3

Remove the plasma filter in 10 seconds.

4

Use a vacuum cleaner to remove any dirt.

- If dirt is difficult to remove, wash the filter

with lukewarm water.

5

Dry the filter in the shade.

NOTE

!

The location and shape of the filters may
differ, depending on the model.

NOTE

!

• The location of the filters may differ, de-

pending on the model.

• The plasma filter may not be included in

some models.

• The feature can be changed according a

type of model.

* The feature can be changed according a

type of model.

* The feature can be changed according a

type of model.

Содержание R18AWN-NC11
























Отзывы: