55
206-4354
Cloning Procedures (Cont.)
(Continued from previous page)
• If you have initiated the EZ-Manager Wizard, you can use the wizard’s “USB Configuration”
option to access the TV Manager and complete the import procedure (see “TV Configuration
Options” and/or “USB Configuration” on pages 23 and 32, respectively, as necessary).
• You may also use the Ez Download utility to import the Clone/Configuration (.tlx) file. See “Ez
Download Utility” on pages 34 to 37 for further information.
• If the Target TV is currently in Pass-through Mode and you intend to use the TV’s Zoning
feature(s)—i.e., the Clone/Configuration (.tlx) file you are importing contains an FTG Channel
Map and/or FTG profile(s) with TV Zone and/or Wi-Fi Zone assignments—make sure to set the
appropriate TV Zone # and/or Wi-Fi Zone # in the TV when directed to do so in the procedure
below. See Reference section, “Using the TV’s Zoning Features,” for further information.
• If you would like the Target TV(s) to remain in Pass-through Mode or Application Tuning Mode,
as applicable, after the Clone/Configuration (.tlx) file is imported, ensure the “.tlx” file does not
contain an FTG Channel Map; otherwise, the import procedure will result in the Target TV(s)
being configured for FTG Mode.
• If a Clone (.tlx) file (exported Master TV Setup) contains an FTG Channel Map, the physical RF
channels in the FTG Channel Map have been assigned logical channel numbers (see “Exporting
a Clone File” above). When you import the Clone file with the FTG Channel Map on the Target
TV(s), you will have the option to select either logical or physical channel tuning. Even if you
select physical channel tuning, the (list of) physical RF channels in the FTG Channel Map will
remain in logical order.
• If an FTG Configuration (.tlx) file (created in the Cloud Configuration Tool) contains an FTG
Channel Map, each logical channel number in the FTG Channel Map has been assigned a
physical RF channel, an IP channel, or an Aux input (the latter designated by 130-0 through
137-0—see also Reference section, “TV Aux Input Configuration”).
Note:
If the FTG Channel Map includes RF channels and Aux inputs
only
, when you import
the FTG Configuration file on the Target TV(s), you will have the option to select either logical
or physical channel tuning. If you select physical channel tuning, the physical RF channels and
Aux inputs in the FTG Channel Map will remain in logical order. Physical channel tuning is not
available when the FTG Channel Map includes IP channels.
• If the Clone/Configuration (.tlx) file was edited/created in the Cloud Configuration Tool, it may
contain multiple zoned FTG Installer Menu profiles for different TV models. Make sure it includes
the appropriate Installer Menu profile(s) for the Target TV(s) before performing the procedure
below.
Caution: Do not unplug the TV power cord or remove the USB memory device while
importing is in progress, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Import Clone File Procedure
1. Turn ON the Target TV.
2. The next step depends on whether the First Use Wizard appears on the screen when you turn
ON the TV:
(Continued on next page)
