LG Privilege GR-L207 Скачать руководство пользователя страница 113

Страница: 113 / 146

2-7. Sound

TROUBLE DIAGNOSIS

- 113 -

Problems

Causes

Checks

Measures

Remarks

"Whizz" sound

1. Loud sound of compressor

1.1 Check the level of the

1) Maintain horizontal level.

operation.

refrigerator.

2) Replace rubber and seat if they

1.2 Check the rubber seat

are sagged and aged.

conditions (sagging and aging).

3) Insert rubber where hand contact

reduces noise in the pipe.

2. Pipes resonat sound which is

2.1 Check the level of pipes

4) Avoid pipe interference.

connected to the compressor.

connected to the compressor

5) Replace defective fan and fan

and their interference.

motor.

2.2 Check rubber inserting

6) Adjust fan to be in the center of

conditions in pipes.

bell mouth of the fan guide.

2.3 Touch pipes with hands or screw

7) Leve a clearance between

-driver (check the change of

interfering parts and seal gaps in

sound).

the structures.

8) Reassemble the parts which make

3. Fan operation sound in the freezer

3.1 Check fan insertion depth and

sound.

compartment.

blade damage.

9) Leave a clearance if evaporator

3.2 Check the interference with

pipes and suction pipe touch

structures.

freezer shroud.

3.3 Check fan motor.

3.4 Check fan motor rubber insertion

and aging conditions.

4. Fan operation sound in the

4.1 Same as fan confirmation in the

compressor compartment.

refrigerator.

4.2 Check drip tray leg insertion.

4.3 Check the screw fastening

conditions at condenser and

drip tray.

Содержание Privilege GR-L207



















































































































































Результаты поиска

Содержание Privilege GR-L207

Отзывы:

Похожие инструкции для Privilege GR-L207

Бренды по названию

Популярные бренды

LG Privilege GR-L207, Руководство по обслуживанию

Результаты поиска

Содержание Privilege GR-L207

Отзывы:

Похожие инструкции для Privilege GR-L207

Бренды по названию

Популярные бренды