![background image](http://html.mh-extra.com/html/lg/premtb10u/premtb10u_installation-and-operation-manual_221078067.webp)
INSTALLATION INSTRUCTIONS
67
ENGLISH
Installer Setting - Test Run Mode
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
Press button to start.
3
During the test run, pressing the below
button will exit the test run.
- Select operation mode, temperature
up/down, fan speed, wind direction,
start/stop button.
4
If pressing button long for 3
seconds, it enters into Thermostat
installer setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
- Please cancel the right and left of wind
direction for RAC product.
1
Setup figure ’01’ blinks at the lower part
of indication window.
You can select test heating operation
mode for some products.
Some models have Heating test run
mode.
In that case, Select test run mode by
pressing button.
01: cooling
02: heating
2
Function Code
Set
Содержание PREMTB10U
Страница 94: ...94 ENGLISH ...