LG PQRCHCSA, Инструкция для владельца и по установке

Страница: 7 / 19

Owner’s & Installation Manual 7
ENGLISH
Installation instruction
2) When connecting Terminal Blocks of the indoor C/BOX and the wired remote controller, refer to the steps
below.
①
Remove the screw on the cable which is fastened to the wired remote controller’s Terminal Block by loos-
ening with a screw driver.
②
Remove the peel it as shown in the figure below.
③
Connecting the Wires.
④
After pairing the wires with the terminal block, fasten them securely by tightening the screws.
※
You need to purchase additional Cable
(Specification of Cable : AWG 24, 3 conductor.)
※
The distance between wires should be more than 0.2
inches (5 mm).
※
Connect the wire after inserting the circular terminal.
1.378 (35)
±0.197
(5)
0.394 (10) ± 0.118 (3)
Unit: inch (mm)
0.2 (5)
Unit: inch (mm)
Circular Terminal
Wire
YL
(YELLOW)
RD
(RED)
BK
(BLACK)