LG PQCSC101S0, Инструкция для владельца и по установке, Страница: 20 / 45

During Use
20 Function Control Unit
This function is used to control the indoor unit connected in form of group or whole or search for the indoor unit
displayed on the function controller display window.
1
Select Group or Whole Indoor Unit from the central controller.
1
Press Search Button of the function controller.
2
The operation/stop status display of the relevant indoor unit on the central controller flickers for 5
seconds and displays that function control is being performed
2
The function controller displays "Total On" and operation status of the first indoor unit connected.
*Note : "Total On" segment in the Function controller means that whole indoors are executed by same
command so, "Total On" segment would be displayed not only total on operation but also total off
operation.
3
You can control indoor unit function in form of group or whole by entering the function controller’s
button.
Group Operation and Total Operation
Search for Indoor Unit