LG PPWRDB000, Инструкция по установке и эксплуатации

Страница: 28 / 41

28
SETTING AND USING METHOD
ENGLISH
Setting functions (GHP products)
• Set the properties of the wattmeter and gas meter.
- Pulse type: Set power consumption per pulse / gas consumption, mounting location (divide in-
door and outdoor unit), and the indoor unit address.
- CT (VT) type: Set CT (VT), the instrument integer value, mounting location (divide indoor and
outdoor unit), and the indoor unit address.
WHM1: Mount the wattmeter.
LHM1 : Mount the gas meter.
• When setting the properties of the pulse-type wattmeter (WHM1).
On the Home screen, press the (
▼
) button and then the
screen is switched to the wattmeter / gas meter property
setting screen.
When the item of the wattmeter you want to set is blink-
ing, press the SELECT button, and the screen will be
switched to the detailed setting screen.
After setting every wattmeter, press the menu button to save the settings and the screen will be
switched to the initial screen.
Set power consumption per pulse
’
set the power consump-
tion device
’
set the connected indoor unit address in order.
- Set power consumption per pulse (WHM W / PULSE SELECT).
: Please enter a value shown in the wattmeter as the power
consumption recognized per pulse.
- Set the power consumption device (CONSUME UNIT SELECT).
: Please set up after making sure that the wattmeter is in-
stalled, and checking whether the product installed is the
indoor or outdoor unit.
※
If one indoor unit is set to use both outdoor unit power dis-
tribution and indoor unit power distribution, wattage value is
displayed as indoor unit wattage value by summing outdoor
unit power distribution value and indoor unit power distribu-
tion value.
- Set the connected indoor unit address (INDOOR ADDRESS SET).
: Enter the address of the indoor unit connected to the
wattmeter.
※
After the initial installation, address setting of indoor unit
connected to each port shall not be changed. If it is
changed, previous data cannot be used.
After setting the item, press the SELECT button to save the
setting, and then move to the next step.
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : N O T U S E
L H M 1 : N O T U S E
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : N O T U S E
L H M 1 : N O T U S E
* W H M W / P U L S E S E L E C T *
1 . N O T U S E
2 . 1 W / P U L S E
3 . 2 W / P U L S E D O W N
C O N S U M E U N I T S E L E C T
1 . O U T D O O R U N I T
2 . I N D O O R U N I T
I N D O O R A D D R E S S S E T
(START)
→
(END)
(00)
→
(00)
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : 2 W , O D U , 0 0 - 0 0
L H M 1 : N O T U S E
Configuration information is reflected on the
detailed setting window.
1,MFL67982907,영영 2017. 7. 13. 영영 1:14 Page 28