LG PH-U450 Series, Руководство пользователя, Страница: 36 / 43

36 Air Purifier
Filter cleaning and exchange
Cleaning method of tray and humidifier filter
Classification Replacement cycle Cleaning cycle Cleaning method
Tray,
tray lid
Water tank
Humidifier
filter
-
6-12
months
• When filling the water tank, fill up to 1/3 and rinse it 4-5 times to wash it out.
• Dissolve 10g of neutral detergent or citric acid in 1L of warm water for 1-2 hours, and then use the cleaning brush to
clean the parts. After cleaning, make sure to rinse sufficiently. (After cleaning the filter, close the front panel. If not
closed completely, the product will not work.)
• Make sure to clean with a soft brush any white powder contents, around the filter or the case, which may cause a smell or noise.
• Citric acid: Can be purchased at pharmacy or on the Internet.
• Frequently wash the tray and humidifier filter. This will remove the scaling and you can use the product better sanitary condition.
• Do not disassemble the float of the tray. It can cause product failure.
If the product is disassembled by impact, assemble in the order show in the right picture.
• DO NOT take the humidifier filter case apart. This may result in deformation or damage in the filter or the case.
• In cleaning, wipe the filter GENTLY with a brush, or the fiber can be degraded.
Daily
- Daily
More than
1 time
weekly
• Rinse the water tank by
shaking 4-5 times.
• Wipe softly the
humidifier filter with a
brush, by holding the
case.
• When washing the humidifier
filter case, be careful as it
can be damaged.
• After cleaning with neutral
detergent or citric acid, rinse
the filter with clean water.
Caution
• If the part is not rinsed sufficiently it can carry the odor of the detergent or citric acid,
and can cause discoloration or deformation of the product.
• White chunk can be attached on the humidifier filter or the filter can be discolored to
red or yellow during use. This is due to the impurity such as calcium included the tap
water and is a normal phenomenon.
1. Insert the
float under
this hook.
2. Insert the float
hook into the
hole.
3. Insert the hook on the other
side of the float to the hole.