background image

22

ENGLISH

CAUTION

Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.

!

Class A device

NOTE

!

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.

These limits are designed to pro-vide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.

Disposal of your old appliance

1 When this crossed-out wheeled bin symbol is attached to a product it means the

product is covered by the European Directive 2002/96/EC.

2 All electrical and electronic products should be disposed of separately from the

municipal waste stream via designated collection facilities appointed by the gov-
ernment or the local authorities.

3 The correct disposal of your old appliance will help prevent potential negative

consequences for the environment and human health.

4 For more detailed information about disposal of your old appliance, please con-

tact your city office, waste disposal service or the shop where you purchased the
product. 

Содержание PEXPMB000
























Отзывы: