LG PCS400R Pro:Centric, Инструкция по установке и настройке, Страница: 22 / 57

22
ENGLISH
Log In to the PCS400R and Access the Main Menu
* Note : The PCS400R must be connected to an IP network for SSH client access. For direct access to the PCS400R Service Port, use the FTDI
TTL-USB cable (P/N TTL-232R-5V-AJ). See also “Network and Communication Setup” above for further information.
1 Establish communication with the PCS400R using an SSH client or via a direct connection to the PCS400R Service Port.
Once communication is established, you should see a login prompt. (If the login prompt is not automatically displayed, press Enter to refresh the
screen.)
2 At the
login as
: prompt, type admin and press Enter .
3 At the
Password
: prompt, type the admin password and press Enter .
4 At the
Command >
prompt, either:
• Press Enter to display the PCS400R Main Menu (See example below).
• Type the desired command and press Enter .
The following sections describe each of the configuration commands.
* Note : You can always press Enter at the
Command >
prompt to display the PCS400R Main Menu.
Example: PCS400R Main Menu
Main Menu
info
setip
tz
time
pwd
portal
monitor
shut
reset
exit System information
TCP/IP Setup Menu
Timezone setup
Time setup
Change password
Select the portal application
System monitor
Shutdown the system
System Reset
End the session
Command >