26
USING THE PROJECTOR
Menu
Description
Full
Wide
When projector receives the
wide screen signal, it will
let you adjust the picture
horizontally or vertically,
in a linear proportion,to fill
the entire screen fully. 4:3
and 14:9 video is supported
in full screen without any
video distortion through
DTV input.
y
In Analogue/DTV/AV
mode, Full Wide is
available.
4:3
Resizes images to the
previous standard 4:3.
14:9
You can view a picture
format of 14:9 or a general
projector programme in the
14:9 mode. The 14:9 screen
is viewed in the same way
as in 4:3, but is moved up
or down.
Zoom
Resizes the image to fit the
screen width. The top and
bottom parts of the image
may be cut off.
Press the or button to
zoom in or out of the image.
Press the or button to
move the image.
Cinema
Zoom 1
Formats an image to the
cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
Press the or button to
zoom in or out of the image.
Press the or button to
move the image.
y
If you enlarge or reduce
an image, the image may
be distorted.
Additional Options
Adjusting Aspect Ratio
y
Select
SETTINGS
→
PICTURE
→
Aspect Ratio
to change the aspect
ratio.
NOTE
y
Available picture size may differ
depending on the input signal.
y
You can also use the
Q.MENU
button.
Menu
Description
16:9
Resizes images to fit the
screen width.
Full
Changes to the full screen
regardless of the aspect
ratio.
Just
Scan
Displays video images in
the original size without
removing parts of the edge
of the image.
y
If you select
Just Scan
,
you may see image
noises at the edge or
edges of the screen.
Original
When your projector
receives a wide screen
signal it will automatically
change to the picture format
broadcasted.
