LG OLED55E9PUA Скачать руководство пользователя страница 56

Страница: 56 / 115

Off when on, off while viewing, power auto on/off

Established

date

Revised date

8/17

Error

symptom

Standard Repair Process

* Please refer to the all cases which can be displayed on power off mode.

B. Power error

Power Off History

Explanation

Action contents

POWER_OFF_BY_CPU_ABNORMAL

Power off by CPU Abnormal status

1. Power off (Last Cold, Last Cool, Last Warm)

Condition : When power on and checking Power on Mode, abnormality appears.

2. Power off in CPU Abnormal Case (Exception)

- Release Mode : Reboot

- Debug/Event Mode : Power off

Check & Change Main B/D

POWER_OFF_BY_CPUCMD

Power off by main SoC command.

Check & Change Main B/D

POWER_OFF_BY_ABN

Case1 : Pipe line overflow

Case2 : reboot to suspend Fail

Check & Change Main B/D

POWER_OFF_BY_KEYTIMEOUT

Power off when TV is not turned off during a certain time

Result : micom force to trigger TV power off.

Condition : When pressing power key while power on/off status, CPU does not

response within 8 seconds or call the WDT timer API.

Check & Change Main B/D

POWER_OFF_BY_ACDET

Power off by not detecting AC (abnormal case)

Result : micom triggers TV power off

Condition : Power detect port drops to low while power on status.

Normal Case

Check & Change Main B/D

POWER_OFF_BY_5VMNT

Power off by not unstable AC power detect.

Result : micom check the stable power.

Condition : When AC on or DC on, stabilization check routine (Power Detect High

Check) fail after multi power on.

Check & Change Main B/D

POWER_OFF_BY_NO_POLLING

Power off when receiving no ack

Debug Status : Release Mode

Result : TV power off/on (Reboot)

Condition : There is no I2C response from CPU for 15 seconds.



if warm standby, power off occurs.

Check & Change Main B/D

POWER_OFF_BY_REMOTE_KEY2

similar with POWER_OFF_BY_KEYTIMEOUT, but different concept.

Result : micom force to trigger TV power off within 4 seconds.

Condition : When TV power on/off, CPU does not response within 4 seconds,

and then pressing power key.

Check & Change Main B/D

POWER_OFF_BY_INV_ERROR

Power off by OLED module error

Check & Change OLED

Module

POWER_OFF_BY_ONRF_FAIL

Result : Reboot

Condition : OLED module compensation is running but fails.

Check & Change OLED

Module

POWER_OFF_BY_PNWASHFAIL

Power off by panel noise wash function fail case. (OLED)

Check & Change OLED

Module

POWER_OFF_BY_RESUME_FAIL

Power off by resume fail when dc on case.

If occur the resume fail, TV will be rebooted.

Check & Change Main B/D

Only for training and service purposes.

Содержание OLED55E9PUA

















































































































Результаты поиска

Содержание OLED55E9PUA

Отзывы:

Бренды по названию

Популярные бренды

LG OLED55E9PUA, Руководство по обслуживанию

Результаты поиска

Содержание OLED55E9PUA

Отзывы:

Бренды по названию

Популярные бренды