background image

8

ENG

ENGLISH

8

EXTERNAL CONTROL DEVICE SETUP

08. Color/Colour (Command: k i)

 

► To adjust the screen Color(Colour). 

You can also adjust colour in the PICTURE menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min :  00 to Max : 64

Ack [i][ ][Set ID][ ][OK/NG][Data][x]

09. Tint (Command: k j)

 

► To adjust the screen tint. 

You can also adjust tint in the PICTURE menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red :  00 to Green : 64

Ack [j][ ][Set ID][ ][OK/NG][Data][x]

10. Sharpness (Command: k k)

 

► To adjust the screen sharpness. 

You can also adjust sharpness in the PICTURE 

menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min :  00 to Max : 32

Ack [k][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l)

 

► To select OSD (On Screen Display) on/off when 

controlling remotely.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00 :  OSD off

01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m)

 

► To lock the front panel controls on the monitor and 

remote control.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00 : Lock off

01 : Lock on

Ack [m][ ][Set ID][ ][OK/NG][Data][x]

*  If you are not using the remote control, use this 

mode. 

When main power is off & on (plug-off and plug-in, 

after 20 - 30 seconds), external control lock is 

released.

*  In the standby mode (DC off by off timer or ‘ka’, 

‘mc’ command), and if key lock is on, TV will not 

turn on by power on key of IR & Local Key. 

13.  Treble (Command: k r)

 

► To adjust treble. 

You can also adjust in the AUDIO menu. 

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min :  00 to Max : 64

Ack [r][ ][Set ID][ ][OK/NG][Data][x]

* (Depending on model) 

14.  Bass (Command: k s)

 

► To adjust Bass. 

You can also adjust in the AUDIO menu. 

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min :  00 to Max : 64

Ack [s][ ][Set ID][ ][OK/NG][Data][x]

* (Depending on model) 

15. Balance (Command: k t)

 

► To adjust balance. 

You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min :  00 to Max : 64

Ack [t][ ][Set ID][ ][OK/NG][Data][x]

16. Color(Colour) Temperature (Command: x u)

 

► To adjust colour temperature. You can also adjust 

Color(Colour) Temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min :  00 to Max : 64

Ack [u][ ][Set ID][ ][OK/NG][Data][x]

17. ISM Method (Command: j p) (Only Plasma TV)

 

► To control the ISM method. You can also adjust 

ISM Method in OPTION menu.

Transmission [j][p][ ][Set ID][ ][Data][Cr]

Data Min :  02: Orbiter 

08: Normal 

20: Color(Colour) Wash

Ack [p][ ][Set ID][ ][OK/NG][Data][x]

Содержание OLED55C7BO.ATR


































Отзывы: