LG OLED55B7D-Z, Руководство пользователя

Страница: 16 / 38

ENGLISH
4
•
Please follow the installation instructions below to prevent the
product from overheating.
- The distance between the product and the wall should be more
than 10 cm.
-
Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).
- Do not install the product on a carpet or cushion.
- Make sure the air vent is not blocked by a tablecloth or curtain.
This may result in fire.
•
Take care not to touch the ventilation openings when watching the
TV for long periods as the ventilation openings may become hot. This
does not affect the operation or performance of the product.
•
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized servicer.
•
Prevent dust collecting on the power plug pins or outlet. This may
cause a fire hazard.
•
Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
•
Do not press strongly upon the panel with a hand or sharp object
such as nail, pencil or pen, or make a scratch on it, as it may
cause damage to screen.
•
Avoid touching the screen or holding your finger(s) against it for long
periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.
•
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this unit
by SWITCH.
•
When unplugging the cable, grab the plug and unplug it, by pulling
at the plug. Don’t pull at the cord to unplug the power cord from the
power board, as this could be hazardous.
•
When moving the product, make sure you turn the power off first.
Then, unplug the power cables, antenna cables and all connecting
cables.
The TV set or power cord may be damaged, which may create a fire
hazard or cause electric shock.
•
When moving or unpacking the product, work in pairs because the
product is heavy. Otherwise, this may result in injury.
•
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
•
Do not use high voltage electrical goods near the TV (e.g. electric
mosquito-swatter). This may result in product malfunction.
•
When cleaning the product and its components, unplug the power
first and wipe it with a soft cloth. Applying excessive force may
cause scratches or discolouration. Do not spray with water or wipe
with a wet cloth. Never use glass cleaner, aerial fresher, insecticide,
lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol
etc., which can damage the products and its panel. Otherwise, this
may result in fire, electric shock or product damage (Deformation,
corrosion or breakage).
•
If the back of the glass on the bottom side of the screen has been
contaminated with dust or other materials, you can clean it using a
cotton flannel or a cloth. (Only OLED65E7*)
Preparing
•
If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
•
Image shown may differ from your TV.
•
Your TV’s OSD (On Screen Display) may differ slightly from that shown
in this manual.
•
The available menus and options may differ from the input source or
product model that you are using.
•
New features may be added to this TV in the future.
•
The items supplied with your product may vary depending on the
model.
•
Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
•
For an optimal connection, HDMI cables and USB devices should have
bezels less than 10 mm thick and 18 mm width. Use an extension
cable that supports USB 2.0 if the USB cable or USB memory stick
does not fit into your TV’s USB port.
A
B
A
B
* A
<
=
10 mm
* B
<
=
18 mm