background image

ENGLISH

11

 CAUTION

•  Avoid touching the screen at all times, as this may result in damage 

to the screen.

•  Do not move the TV by holding the cable holders, as the cable 

holders may break, and injuries and damage to the TV may occur.

Using the button 

(Depending on model)
You can simply operate the TV functions, pressing or moving the button.

<A type>

Joystick Button

Dome Button

or

<B type>

Joystick Button

Basic functions 

Power On (Press)
Power Off (Press and hold)

1

Volume Control

Programmes Control

1  All running apps will close, and any recording in progress will stop.

Adjusting the menu

When the TV is turned on, press the   button one time. You can adjust 
the Menu items pressing or moving the buttons.

 

Turns the power off. 
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Accesses the settings menu.

Mounting on a table

1  Lift and tilt the TV into its upright position on a table.  

•  Leave a 10 cm (minimum) space from the wall for proper 

ventilation.

10 cm

10 cm

10 cm

10 cm

10 cm

2  Connect the power cord to a wall outlet.

 CAUTION

•  Do not place the TV near or on sources of heat, as this may result in 

fire or other damage.

Содержание OLED55B6T-T













































Отзывы: