9
ENGLISH
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
• This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts
directly because the related standards have not been confirmed.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
•
→
→
→
General
→
HDMI ULTRA HD Deep Colour
- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off: Support 4K @ 50/60 Hz 8bit (4:2:0)
• If the device connected to Input Port also supports ULTRA HD Deep
Colour, your picture may be clearer. However, if the device doesn’t
support it, it may not work properly. In that case, connect the
device to a different HDMI port or change the TV’s ULTRA HD Deep
Colour setting to Off.
• Supported HDMI Audio format :
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), DTS
(44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz,48 kHz,96 kHz,192 kHz)
(Depending on model)
Slim remote control
(Some buttons and services may not be provided depending on
models or regions.)
The descriptions in this manual are based on the buttons on the
remote control. Please read this manual carefully and use the
TV correctly. To replace coin batteries, turn the battery cover
counterclockwise by using a coin. Then, take the battery cover. Insert
and fix the battery (CR2032) with the facing forward. And, Put
the battery cover on the remote control and turn it clockwise to close.
To remove the coin batteries, perform the installation actions in
reverse.
Make sure to point the remote control toward the remote control
sensor on the TV.
A
(POWER)
Turns the TV on or off.
You can turn your set-top box on or off by adding the set-top
box to the universal remote control for your TV.
Adjusts the volume level.
(MUTE)
Mutes all sounds.
Scrolls through the saved programmes.
B
Returns to the previous screen.
* Clears on-screen displays and returns to last input viewing.
(HOME)
Accesses the Home menu.
(INPUT)
Changes the input source.
- Pressing and holding the (INPUT ) button displays all the lists
of external inputs.
Selects menus or options and confirms your input.
Navigation buttons
(up/down/left/right) Press
the up, down, left, or right button to scroll the menu.
MFL69830001_OLED_W7_S_HK_Eng.indd 9
2017-01-06 4:04:00
