Operating
18
Oper
ating
2
Other Operations
Using Your Unit as an Alarm
Clock
1. Make sure that you have set the clock correctly.
(See “Setting the Clock” on page 9-10.)
2. Press and hold
Alarm On/Off
on the back
panel.
3. The alarm sound sources blink. (FM (Tuner)/
IPOD) While each of sound sources blinks, select
the one you want by pressing
. If you select
FM (Tuner) mode, you can select the station you
preset by pressing
/
and then press
to save.
4. “ON (Time)” setting is displayed.
The hour setting blinks. Press
/
to select
the hour and then press
to save.
5. The minute setting blinks. Press
/
to
select the minute and then press
to save.
6. The volume setting blinks. Press
/
to
change the volume and then press
to save.
•
Alarm function only works when this unit is
turned off.
•
You can check the setting status by pressing
Alarm On/Off
on the back panel two times.
•
If you want to reset the alarm, repeat steps
2-6.
,
Note
Activate and Deactivate the
Alarm Timer
Press
Alarm On/Off
repeatedly on the back panel
to activate or deactivate the timer.
-
If the timer is activated, “
” is displayed.
-
If the timer is deactivated, “
” is not displayed.
Stop Alarm Ring
-
When the alarm rings, press
Alarm On/Off
on
the back panel or press
1
.
-
The alarm stops but the alarm settings remain.
•
If you don’t set clock on your iPod/iPhone/
iPad, the unit will not be synchronized for
the clock with your iPod/iPhone/iPad.
•
If you unplug the cord from an outlet, the
alarm setting you set is not stored.
•
After setting a clock function, you can set
alarm function.
•
If you do not press any button for 30
minutes after the alarm goes off, the alarm
will shut off automatically.
•
If you set the clock and alarm, you can
check the time and alarm icon “
“ by
pressing
Alarm On/Off
although the unit is
standby mode.
•
If the time you set is up, the unit will be
turned on automatically.
,
Note
Snoozing
The snoozing function wakes you up every 10
minutes if you tap anywhere on the control panel
while the alarm activates.
“ZZZ” appears and “
” blinks. To cancel the
snoozing function, press
Alarm On/Off
or
1
.
Resume Playback
The unit memorizes the point where you pressed
. Press
to resume playback.
ND5521-FC.BDEULLK_ENG.indd 18
12. 10. 10. �� 1:41
Содержание ND5521
Страница 23: ...ND5521 FC BDEULLK_ENG indd 23 12 10 10 1 41 ...
Страница 24: ...ND5521 FC BDEULLK_ENG indd 24 12 10 10 1 41 ...