Operating
12
Oper
ating
2
•
If you don’t set clock on your iPod/iPhone,
the unit will not be synchronized for the
clock
with your iPod/iPhone .
•
If you unplug the cord from an outlet, the
clock setting you set won’t be stored.
•
After setting a clock function, you can set
alarm function.
•
Since the alarm goes off if you don’t press
any button for 30 minute, the alarm will
stop working automatically.
•
If you set the clock and alarm, you can
check the time and alarm icon “
“ by
pressing
ALARM
although the unit is stand
by mode.
•
If you activate the alarm, the alarm icon “
“ will appear in the display window.
•
If you deactivate the alarm, the alarm icon
“
“ will disappear in the display window.
•
Alarm function only works when the unit is
turned off.
•
If the time you set is up, the unit will be
turned on automatically.
•
After alarm function works, you can turn it
off by pressing
ALARM
or
P/1
.
•
You can only set 12 : 00. (for an PM display)
,
Note
Sleep Timer Setting
While listening to music or radio, press
SNOOZE/
SLEEP
repeatedly to select delay time between 10
and 180 minutes. After delay time, the unit will turn
off. (You can see the following order, 180 -> 150
->120 -> 90 -> 80 -> 70 -> 60 -> 50 -> 40 -> 30 -> 20
-> 10)
To cancel the sleep function, press
SNOOZE/SLEEP
repeatedly until the display window get bright.
•
You can check the remaining time before
the unit turns off by pressing
SNOOZE/
SLEEP
.
•
Sleep function will work after dimmer
function.
,
Note
Radio Operations
Antenna Connection
Connect the FM wire antenna to FM antenna
connector.
1. Press
P/1
repeatedly until FM appears in
the display window. The last received station is
tuned in.
2. Auto tuning : Press
/
for about 2 seconds
until the frequency indication starts changing,
then release. scanning stops when the unit tunes
in a station.
Manual tuning: Press
/
repeatedly.
3. Adjust the volume by pressing
- / +
(VOLUME) .
ND1520-FI.BGBRLLK_6285-ENG.indd 12
2012-04-19 6:17:32
