3 Operating
Operating
12
Oper
ating
3
Operations
DOLBY DRC (Dynamic Range
Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to the DOLBY DRC by
pressing
DOLBY DRC ON
.
To cancel the DOLBY DRC, press
DOLBY DRC OFF
.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
Use
AV SYNC -/+
to scroll up and down through
the delay amount, which you can set at anything
between 0 and 300ms.
When the AV SYNC reaches the highest/lowest
level and you push
AV SYNC -/+
on remote
control again, red LED on the unit turns on for
2 seconds to signal on what the AV SYNC level
is.
,
Note
AUTO POWER DOWN
This unit turns off automatically to save power
consumption if no signal is transmitted to the unit
for about 25 minutes.
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.
AUTO POWER On/Off
This function is automatically turns on/off the unit
when you turn on/off the external device (TV, DVD
player, Blu-ray player etc.) connected to the unit
by optical cable. Turn on this function by pressing
AUTO POWER ON
.
To cancel it, press
AUTO POWER OFF
.
If you don’t connect external device to the unit
by optical cable or there is no digital input, the
unit is turned off after 15 minutes when you
turn on this function.
,
Note
Turn off the sound temporarily
Press
to mute your unit.
You can mute your unit, for example, to answer the
telephone.
Red LED on the unit blinks at intervals of 2
seconds to signal that the unit is in mute
mode.
,
Note
NB2020A-N0_DGBRLLK_ENG_4459.indd 12
2012-07-26 2:46:01
