99
Wall-outlet type
Analog signal
Using the Network Monitor
1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form to .
1
2
1
2
Connect peripheral devices
Connect LAN Cable
Connecting the Display
Keyboard/Mouse Input
LAN cable should be
connected before boo-
ting PC.(This item must
be purchased separately.)
Headphone/Earphone Input
Automatically mutes the
speaker volume when the
headphones are plugged in.
When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest
level and adjust the monitor volume.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or titled
screen while using the device or after changing screen resolution, press the AUTO/SET function
button to improve resolution.
2.
Press button on the front switch panel to turn the power on.
USB 1.1 port
Only keyboard and
mouse can be used
2.0 port
(USB memory
stick)can be used
Host
ISP
(Internet Service Provider)
switch hub
Network Monitor
Angle type, earphone and microphone connection, peripheral devices connected hard as
anybody, Straight type is recommended.
USB 2.0 port to attach to the USB Extension, will be used more Useful.
D-SUB cable and LAN cable when connected together, D-SUB cable to connect the first,
LAN cables, and other input To connect a cable.
Angle type Straight type