CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE
PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
WARNING:
Do not install this equipment in a confined
space such as a book case or similar unit.
CAUTION:
The apparatus shall not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION:
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product
and to protect it from over heating. The openings shall
be never be blocked by placing the product on a bed,
sofa, rug or other similar surface. This product shall not be
placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
To disconnect power from the mains, pull out the mains
cord plug. When installing the product, ensure that the
plug is easily accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive 2002/96/
EC.
2. All electrical and electronic products should
be disposed of separately from the municipal
waste stream via designated collection
facilities appointed by the government or the
local authorities.
3. The correct disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
4. For more detailed information about disposal
of your old appliance, please contact your
city office, waste disposal service or the shop
where you purchased the product.
For Wireless product European Union Notice
LG Electronics hereby
declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC, 2004/108/EC, 2006/95/EC, 2009/125/EC and
2011/65/EU.
Please contact to the following address for obtaining a
copy of the DoC (Declaration of Conformity).
Contact office for compliance of this product:
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
y
Please note that this is NOT a Customer Service contact
point. For Customer Service Information, see Warranty
Card or contact the dealer that you purchased this
product.
Indoor use only.
RF Radiation Exposure Statement
This equipment should be installed and operated with
minimum distance of 20 cm from your body.
NOTICE:
For safety marking information including product
identification and supply ratings, please refer to the main
label on the bottom or rear of the apparatus.
CAUTION:
Only use the AC adapter supplied with this
device. Do not use a power supply from another device
or another manufacturer. Using any other power cable or
power supply may cause damage to the device and void
your warranty.
Specification
ENGLISH
Power Supply
12 V
0
1 A
(AC adapter : WA-12M12FK)
Power consumption
5 W
Dimensions
(W x H x D)
Approx.
110 mm x 30.5 mm x 110 mm
Net Weight (Approx.)
0.25 kg
Design and specifications are subject to change without
notice.
Safety Information
About Ferrite Core (Optional)
Reset the Bridge
ADD
ADD
DC IN
ADD
DC IN
Press and hold the
ADD
button for 8 seconds.
How to attach the ferrite core
This ferrite core can reduce or eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the LAN cable on the ferrite core.
3. Close the ferrite core until it clicks.
