8
Indoor Unit
8
Indoor Unit
Installation
Installation
Indoor unit
Install the air conditioner in the location that satisfies the fol-
lowing conditions.
• The place shall easily bear a load exceeding four times the
indoor unit’s weight.
• The place shall be able to inspect the unit as the figure.
• The place where the unit shall be leveled.
• The place shall easily connect with the outdoor unit.
• The place where the unit is not affected by an electrical
noise.
• The place where air circulation in the room will be good .
• There should not be any heat source or steam near the
unit
Confirm the positional relationship between the unit and
suspension bolts.
• Installation the ceiling opening to clean the filter or service
under the product.
Selection of the best location
A(Min)
B(Min)
Ceiling
Service Space
A
B
• Refer to Suction grille and Suction canvas installation
manual for detail installation of Built-in duct type
270(7-5/8)
or more
520(7-5/8)
or more
Inspection hole
(600(23-5/8) x 600(23-5/8))
Control box
600
(23-5/8)
600
(23-5/8)
Top view
[Unit: mm(inch)]
Airflow
[Unit: mm(inch)]
Built-in Duct type
Chassis
A
B
B3
600(23-5/8)
900(35-7/16)
B4
600(23-5/8)
1100(43-5/16)
[Unit: mm(inch)]
