4
Installation method
1
2
1. Check the VESA standard for the TV.
2. Mark the wall mounting location using the VESA template provided.
Attaching the mounting bracket to the TV
Use the Paper Template to Mark Screw Locations
- If the screws are not fully tightened when you attach the guide spacers and the lower spacers, check the
length of the screws and refer to the technical service manual.
- The actual product may differ from the illustrations in this manual.
<Work procedure>
1. Check to see if the display has screws installed
into the mounting holes. If so, remove those.
2. Attach the two guide spacers and the two lower
spacers in the order as shown in the figure.
Attach the two guide spacers on the upper side
of the product and the two lower spacers on the
lower side.
- Place the TV on a table with the screen facing
down. Make sure that you place it on the flat
surface covered with the soft clothing or a cushion
to protect it from scratches.
- Tighten the screw until the guide spacers and the
lower spacers are joined together securely.
- Use a Phillips Head "+" screw driver (Manual or
motorized) to tighten the screws.
Guide space screw
Lower spacer screw
Guide spacer
Lower spacer
&(17(5
723
723
