LG MS408D, Руководство пользователя

Страница: 55 / 60

55
Playback
Cannot play MUSIC/
b
The files are not recorded in a format that the recorder can play.
PHOTO/MOVIE files. b The recorder does not support the codec of the movie file.
Recording
Cannot record or does b Check the remaining space on the HDD.
not record successfully.
b
If your source is copy-protected, you cannot record it using this recorder.
b
If you set a DTV rating for the recorder and higher rated digital programs are received, the programme
cannot be recorded. Change the DTV rating level in order to record it.
Timer record does not
b
Clock is not set to correct time.
record successfully.
b
The start time of the timer recording is past.
b Two timer recordings may have overlapped, in which case only the earlier one will record
completely.
b When setting the recording programme, make sure you set the recorder’s built-in tuner, not the TV’s
built-in tuner.
b If the HDD is damaged, the recording may not complete successfully.
You cannot enter a
b
A recording is already underway.
timer programme when
b
The time you’re trying to set has already passed.
b There are already 32 timer programs set.
If two or more timer b The earlier programme takes priority.
programs overlap
b
The recorder can record 2 channels simultaneously but do not make overlap timer recording, may
some programme cannot be recorded according to it’s priority.
b
If the HDD is damaged, the recording may not complete successfully. In this case even though
the [Check] field shows [Ready], it may not be.
Troubleshooting
General
The power does
b
Plug the power cord into the wall outlet securely.
not turned on.
There is no picture.
b
Select the appropriate video input mode on the TV so the picture from the recorder appears on the
TV screen.
b
Connect the video connection securely.
Picture noise
b
The video signal from the external component is copy-protected.
appears. b Set the resolution that your TV can accept.
b
The programme is not
b
Check your antenna connection.
found or stored.
There is no sound. b Connect the audio connection securely.
b
The input source setting on the amplifier or the connection to the amplifier is incorrect.
b
The recorder is in scan, slow motion, or pause mode.
b
Try to select another audio channel or source using AUDIO button.
b
Set the [Digital Output] option to the correct position (see page 46).
The remote control
b
The remote control is not pointed at the remote sensor of the recorder.
does not work b The remote control is too far from the recorder.
properly.
b
There is an obstacle in the path of the remote control and the recorder.
b
The batteries in the remote control are exhausted.
The connected USB b Try another different USB cable, some of USB cable may not support enough current for normal
not recognized. USB operation.
storage device is b If you use a USB extension cable or USB HUB, the USB devices may not be recognized.
b
Try another USB storage device.
b
This recorder supports only USB Flash Drive and USB External HDD with FAT16, FAT32 or
NTFS format.
b
An USB device which requires additional program installation when you have connected it to a
computer is not supported.