manualshive.com logo in svg

LG MG210, Руководство по обслуживанию, Страница: 54 / 127

Поделиться
Скачать
LG MG210 Скачать руководство пользователя страница 54

4. TROUBLE SHOOTING

- 53 -

Receiver Trouble Shooting Setup

• Initialize GSM MS test equipment.
• Connect PIF-UNION and power on.
• Make a test call to 112.
• Set audio part at test equipment as PRBS or continuous wave, not echo.
• Set the audio volume max.

Trouble shooting Procedure

• Check the audio signal levels at each point.
• Check the soldering of the connector.
• Check the soldering of the receiver.
• Check the receiver.
• Check receiver cable states.

Speaker Trouble Shooting Setup

• Connect PIF to the phone, and power on.
• Enter the engineering mode, and go to menu

“Baseband 

→

Alert 

→

Ring”

Trouble Shooting Procedure

• Check the voltage levels of power supplies.
• Check all sound path.
• Check the sound level to the speaker.
• Check the speaker and the soldering.

Check the states

these points !

Speaker/ Receiver

Folder

FPCB

Z3X-BOX.COM

Содержание MG210
































































































































Отзывы:

Нет отзывов