11
DO NOT USE AN EXTENSION CORD
If possible, connect the refrigerator to its own
individual electrical outlet to prevent it and other
appliances or household lights from causing an
overload that could cause a power outage.
POWER CORD REPLACEMENT
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
ABOUT GROUNDING (EARTHING)
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by
providing an escape wire for the electric current.
In order to prevent possible electric shock, this
appliance must be grounded.
Improper use of the grounding plug can result in an
electric shock. Consult a qualified electrician or
service person if the grounding instructions are not
completely understood, or if you have doubts on
whether the appliance is properly grounded.
DO NOT MODIFY
OR EXTEND THE
POWER CORD
LENGTH
It will cause electric
shock or fire.
This appliance must be grounded (earthed).
DON'T WAIT! DO IT NOW!
VERY DANGEROUS ATTRACTION
An empty refrigerator can be a dangerous attraction
to children. Remove either gaskets, latches, lids or
the entire door from your unused appliance,or take
some other action to make it harmless.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Do not store inflammable materials, explosives
or chemicals in the refrigerator.
IMPORTANT WARNINGS
FREEZER LAMP
1. Unplug the power cord from the outlet.
2. Remove the room lamp lid by taking down while pulling it forward with your hand
after inserting finger into the inside hole as shown in the figure at right.
3. Remove the lamp by turning it counterclockwise and replace new one.
4. Assemble in reverse order of disassembly. Replacement bulb must be the
same specification as original.
REFRIGERATOR LAMP
1. Unplug the power cord from the outlet.
2. Remove the up most refrigerator shelf.
3. Remove the room lamp lid by taking down while pulling it forward with your hand
after inserting finger into the inside hole as shown in the figure at right.
4. Turn the lamp counterclockwise and replace new one.
5. Assemble in reverse order of disassembly. Replacement bulb must be the
same specification as original.
LAMP REPLACEMENT
Disposal of the old appliance
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material and can be reused after rework (recy-
cling). For take back, please contact with the local agency.
NOTE
Dismantling is done in the reverse sequence of assembly. Be sure to unplug the power plug before
dismantling and assembly. Never apply severe force to dismantle parts. Parts may be damaged.
