9
Adjust the display settings
TV Aspect –
Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode –
If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV
screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary
Progressive Scan
Progressive Scan Video provides the high quality pictures with less flickering. If
you are using the Component Video jacks for connection to a TV or monitor that
is compatible with a progressive scan signal, set [Progressive Scan] to [On].
Press
ENTER
to confirm your selection
- If you not press
ENTER
within 10 seconds it will be [OFF].
Adjust the audio settings
DRC (Dynamic Range Control)
– Make the sound accurate when the volume
is turned down (Dolby Digital only). Set to
[On] for this effect.
Vocal
– Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
5.1 Speaker Setup
ON REMOTE
1 Open the settings menu
SETUP
Select the audio icon
U u
Select right to enter the audio menu, then
select 5.1 Speaker Setup
i
ENTER
4 Select the speaker you want to adjust
I i
5 Select an option and change the settings
U u I i
6 Set the output level (volume) of a speaker
from -5dB to +5dB.
I i
7 If you connect speakers to your unit,
setting the Distance lets the speakers to
know how far the sound has to travel to
reach your set listening point. This allows
the sound from each speaker to reach the
listener at the same time.
I i
8 Test the signals of each speaker
Adjust the volume to your taste
according to these signals.
I i
9 Save your settings and exit the Setup
menu
O
RETURN
MDS804-A0U.DNGAFLK_ENG_6114.indd9 9
2009.7.7 1:53:1 PM
