ENGLISH
CAUTION
• Be careful of the cut part around the continuous drainage hole when connecting or separat-
ing the continuous drainage hose. The cut part is sharp, and it may cause injury.
•
T
ake care not to injure hands while connecting drainage hose.
• The product does not work without the water bucket installed.
!
Separate the water bucket from the product.
Then open the rubber cap connected to the
continuous drain at the back of the product.
Insert the water bucket into the product.
- If the water bucket is not inserted, the product will
not operate.
Insert the continuous drainage hose into the contin-
uous drainage hole and connect it to the drain hole
on the product.
※
The form of water container may differ in each product.
- The continuous drainage hose is sold separately. If you wish to use a commercial hose available in the
market, use a hose whose internal diameter is 16 mm.
- Check if the continuous drainage hose is connected to the drain hole on the product correctly. If the contin-
uous drainage hose is not connected to the drain hole on the product correctly, water may leak when dehu-
midification is carried out.
- Items Needed: 16mm (Inner diameter) hose nearby sink or drain.
How to Continuous Drainage Setup
How to connect the hose for continuous drainage
More than
10 cm
Do not bend the continuous drainage
hose or soak it in water.
20
HOW
T
O USE
Continuous
drainage hose
Содержание MD16GQSA1
Страница 30: ......