Operating
17
Operating
3
y
In some of surround modes, some speakers
maybe no sound or low sound, it depends
on the mode of surround and the source of
audio, it is not defective.
y
Maybe you need reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
,
Note
Setting the USER EQ
You can listen to music with the desired sound
eff ect by adjusting the BASS, MIDDLE and TREBLE.
1. Press
USER EQ
.
“USER EQ” is displayed.
2. Press
SET/CD
M
to enter the
USER EQ
.
3. Select the BASS, MIDDLE or TREBLE sound eff ect
you want by using
PRESET - / >
.
4. Press
TUN. -/+
to select the sound level you
want.
5.
To fi nish the setting, press
SET/CD
M
.
Advanced Operations
Listening to music from your
external device
The unit can be used to play the music from many
types of external device. (Refer to the page 12)
1. Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing
1
(Power)
.
3. Select the AUX function by pressing
AUX
on the
unit or
FUNCTION
on the remote control.
4. Turn the external device and start it playing.
Recording to USB
1. Connect the USB device to the unit.
2. Select a function by pressing
CD/AUX/TUNER
on the unit or
FUNCTION
on the remote
control.
One track recording - You can record to USB
after playing a fi le you want.
All tracks recording - You can record to USB after
stop.
Program list recording - After showing the
programmed list, you can record it to USB.
3. Start the recording by pressing
R
on the unit or
X
REC
on the remote control.
4. To stop recording, press
Z
.
Pausing recording
During recording, press
R
on the unit or
X
REC
on the remote control to pause recording. Press it
again to restart recording. (Only Radio, AUX)
MCT436-A0U-APERLLK-ENG.indd 17
MCT436-A0U-APERLLK-ENG.indd 17
11. 07. 05
9:40
11. 07. 05
9:40
