A23
Clock
Adjusting the timer function
The
Off timer
automatically switches the set to off mode at the pre-set time.
1) Press the
menu
button and then use
button to select the
Timer
menu.
2) Press the
button and then use
button to select
Off timer
or
On timer
.
3) Press the
button and then use
button to set the hour(01~12).
4) Press the
button and then use
button to set the minutes(00~59).
5) Press the
button and then use
button to select
Run
or
Hold
.
6) Only
On timer
function; Press the
button and then
button to adjust volume level and
channel number.
7) Press the
enter/menu
button to save.
Off / On timer
Auto off
(
TV/Video
input only)
You must set the time correctly before using
On/Off timer
function.
1) Press the
menu
button and then use
button to select the
Timer
menu.
2) Press the
button and then use
button to select the
Clock
menu.
3) Press button and then use button to select
Manual
.
4) Press
button and then use button to set the hour(01~12).
5) Press
button and then use button to set the minutes(00~59).
6) The default value is -- : -- AM(PM).
If
Auto off
is active and there is no input signal, the TV swithchs to off mode automatically after 10 minutes.
1) Press the
menu
button and then use
button to select the
Auto off
menu.
2) Press the
button and then use
button to select
On
or
Off
.
3) Press the
enter/menu
button to save
.
• In the event of power interruption (disconnection or power failure), the
Clock
must be reset.
• Two hours after the set is switched on by the
On timer
function it will automatically switch
back to off mode unless a button has been pressed.
• Once the
On
or
Off timer
is set, these functions operate daily at the preset time.
•
Off timer
function overrides
On timer
function if they are set to the same time.
• The set must be in off mode for the
On timer
to work.
Note
Timer
Clock
Off timer
On timer
Auto off
OK MENU
Selecting and Adjusting the Screen
This function is used to set up of current time.
You must set the time correctly before using
On/Off timer
function.
1) Press the
menu
button and then use button to select the
Timer
menu.
2) Press the button and then use button to select the
Clock
menu.
3) Press button and then use button to select
Auto
.
4) Press button and then use button to select the time zone for your
viewing area. Your choices are : AUTO, E.S.T(Eastern Standard Time),
C.S.T(Central Standard Time), M.S.T(Mountain Standard Time), P.S.T
(Pacific Standard Time), Alaska and Hawaii.
5) Press button and then use button to set PBS channel.
6) Press button and then use button to set D.S.T (Daylight Savings
Time)
Auto
,
Off
or
On
, depending in whether or not your viewing area
observes Daylight Savings Time.
7) Press
enter
button to save.
Auto Clock Setup
Manual Clock Setup
Содержание M1910A
Страница 40: ......
