background image

Owner's Manual 

3

Safety Precautions

ENGLISH

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions
must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.

Meanings of symbols used in this manual are as shown below.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Be sure not to do.

Be sure to follow the instruction.

Installation

Do not use a defective or
underrated circuit breaker.
Use this appliance on a
dedicated circuit.

• There is risk of fire or electric

shock.

For electrical work, contact
the dealer, seller, a
qualified electrician, or an
Authorized Service Center.

• Do not disassemble or repair

the product. There is risk of fire
or electric shock.

Always ground the product.

• There is risk of fire or electric

shock.

Install the panel and the
cover of control box
securely.

• There is risk of fire or electric

shock.

Always install a dedicated
circuit and breaker.

• Improper wiring or installation

may cause fire or electric shock

Use the correctly rated
breaker or fuse.

• There is risk of fire or electric

shock.

Do not modify or extend the
power cable.

• There is risk of fire or electric

shock.

Do not install, remove, or
re-install the unit by
yourself (customer).

• There is risk of fire, electric

shock, explosion, or injury.

Be cautious when unpacking
and installing  the product.

• Sharp edges could cause injury.

Be especially careful of the
case edges and the fins on the
condenser and evaporator.

For installation, always
contact the dealer or an
Authorized Service Center.

• There is risk of fire, electric

shock, explosion, or injury.

Do not install the product
on a defective installation
stand.

• It may cause injury, accident, or

damage to the product.

Do not let the ventilator run
for a long time when the
humidity is very high and a
door or a window is left open.

• Moisture may condense and

wet or damage furniture.

Содержание LZ-H025GBA2
























Отзывы: