LG LWP-250 Series, Руководство по установке

Страница: 4 / 8

4
ENGLISH
Lock
nut
Lower
Higher
Adjustable
feet
Adjustable feet Adjustable feet
Lock
nut
Lower
Higher
Adjustable
feet
Adjustable feet Adjustable feet
Be sure to press the adhesive parts of the brackets
firmly to the appliance.
Install the eight (8) screws (supplied) to attach the
brackets to the pedestal.
Move the washer/combo to the desired place.
NOTE: The appliance and pedestal assembly
must be placed on a solid and level floor
for proper operation. Adjust the legs of
the appliance and pedestal by turning
with a wrench. Then, adjust the lock nut
toward the pedestal while holding the
pedestal leg using a wrench.
Attach the double-faced tape of the bracket to the
washer/combo as shown so the bent parts of the
brackets align with the edge and can be attached
to the pedestal with screws.
NOTE:
Attach the lower side first.
Safety is foremost---both your own and that of other
people. Many important safety instructions are provided
in this instruction and your appliance. Always read and
observe all safety instructions.
Excessive Weight Hazard
Two or more people may be needed to install and
move the appliance and pedestal assembly.
Do not allow children to play on the drawer.
Do not step on the handle.
WARNING
IMPORTANT: Read and follow these instructions.
The installer must have electrical and mechanical training and acceptable knowledge in the
required work.
NOTICE
1
Remove pedestal, installation hardware, and
instructions from the shipping carton.
Level the washer/combo on the pedestal by
adjusting the feet.
2
Position the washer/combo on top of the pedestal.
NOTE:
Because of the weight of the
washer/combo, two or more people
may be needed.
NOTE:
If the washer or combo was previously
installed, unplug it, disconnect the inlet
hose (s) from the faucet (s), disconnect
the drain hose, and drain all hoses.
WASHER/COMBO INSTALLATION
for washer
for washer
Remove the paper from the bracket.