LG LWD3063BD Скачать руководство пользователя страница 6

Страница: 6 / 89

1-2

GENERAL

READ ALL INSTRUCTIONS BEFORE USE

SAFETY PRECAUTIONS

• Be certain your appliance is properly installed

and grounded by a qualified technician.

• Do not repair or replace any part of the

appliance unless specifically recommended in

the manual.

• All other servicing should be referred to a

qualified technician.

• Always disconnect power to appliance before

servicing by unplugging, removing the fuse or

switching off the circuit breaker.

• DO NOT TOUCH HEATING ELEMENTS OR

INTERIOR SURFACES OF OVEN.

Heating elements may be hot even though they

are dark in color. Interior surfaces of an oven

become hot enough to cause burns. During and

after use, do not touch or let clothing or other

flammable materials contact heating elements

or interior surfaces of oven until they have had

sufficient time to cool. Other surfaces of the

appliance may become hot enough to cause

burns. Among these surfaces are oven vent

openings and surfaces near these openings,

oven doors, and windows of oven doors.

• Use Care When Opening Door.

Let hot air or steam escape before you remove

or replace food in the oven

• Do Not Heat Unopened Food Containers.

Build-up of pressure may cause container to

burst and result in injury.

• Keep Oven Vent

Ducts Unobstructed.

The oven vent could

become hot during

oven use. Never block

this vent and never

place plastic or heat-

sensitive items on or

near the vent.

NOTE:

For proper operation vent trim must be installed.

• Be certain all packing materials are removed

from the appliance before operating.

Keep plastics, clothes, and paper away from

parts of the appliance that may become hot.

• DO NOT force the door open.

This can damage the automatic door locking

system. Use care when opening the oven door

after the self-cleaning cycle. Stand to the side of

the oven when opening the door to allow hot air

or steam to escape. The oven may still be

VERY HOT.

• DO NOT use a steel-wool pad.

It will SCRATCH the surface.

• DO NOT use harsh etching, abrasive

cleaners or sharp metal scrapers to clean

the oven door glass since they can scratch

the surface.

It may result in shattering of the glass.

• Be careful when removing and lifting the door.

• DO NOT lift the door by the handle.

The door is very heavy.

• DO NOT step or sit on oven door.

Be sure to follow proper installation instructions.

ELECTRICAL SAFETY

• Protective Liners. Do not use aluminum foil or

any other material to line the oven bottoms.

Improper installation of these liners may result

in a risk of electric shock or fire.

• Do Not allow aluminum foil or meat probe to

contact heating elements.

Metal bottom

trim (Vent)

Aluminum foil

WARNING

• DO NOT place aluminum foil directly

on the oven bottom.

Metal bottom

trim (Vent)

Aluminum foil

Содержание LWD3063BD


























































































Результаты поиска

Содержание LWD3063BD

Отзывы:

LG LWD3063BD, Руководство по обслуживанию, Страница: 6 / 89

Результаты поиска

Содержание LWD3063BD

Отзывы: